Actually modern fridges are usually less efficient. But that’s because they use refrigerants that are literally thousands of times less harmful to the environment.
Old appliances frequently used R-12 which is an damn nice refrigerant except it depleted ozone and has a GWP (global warming potential) of 10,900. That means 1lb of R12 released into the air causes the same amount of global warming as releasing 10,900 lbs of CO2.
Newer appliances use refrigerants like R134a which still works pretty well, doesn’t deplete ozone, and only has a GWP of 1,430.
The newest appliances are more frequently using R-600a which is hard on compressors because it has a high head pressure and it doesn’t cool quite as well. But it also doesn’t deplete ozone and it has a GWP of just 3. The bigest downside of that one is that it’s very flamable (it’s isobutane) so the legal limit on how much residential appliances can us is very low.
I’ve read somewhere it is because compressor nozzle has to be made thinner/fragiler for the better efficiency. Other comments say it’s because old refrigerants were better but more “dangerous”. Maybe both.
Old appliances broke, but they were made to be easy to fix so our grandparents could just swap out the broken parts. I helped my dad replace the compressor on an older fridge as a kid and the heating elements on my grandma’s toaster. I remember my dad taking me to some locally owned mom and pop hardware store where we could buy replacement parts for old appliances off the shelf. My parents still have the toaster, but that store closed down and new stuff isn’t made to be fixable anymore (most likely due to planned obsolescence thanks to late-stage-capitalism).
On a tangent, when you think about it, throwing an entire toaster away because one heating coil burned out or throwing awag an entire fridge just because the compressor gave out is not rational. But if you tell people we should have the freedom to buy repairable appliances then they look at you like you are crazy. To me, it is the other way around. Sustainability isn’t political or a luxury, it is an inevitabe, unstoppable force of equilibrium.
When it comes to refrigeration in particular newer appliances tend to break more frequently because they are using more environmentally friendly refrigerants. Old CFCs cooled really well with minimal work from the compressor. Newer fridges and freezers are more frequently using isobutane (R600a) because it doesn’t deplete ozone and it’s GWP (global warming potential) is 3 where the GWP of even non ozone depleting HFCs can frequently be in the thousands. The problem is isobutane requires higher head pressures to work properly and doesn’t cool as well as older refrigerants so the compressors have to work much harder to get the same result.
Also when it comes to household fridges and freezers, they really aren’t worth it to fix anymore. You need an EPA 608 cert to even touch refrigerants (in the US anyways). Plus you need a two stage vacuum pump and a recovery machine (amongst other things) both of which can easily cost as much as a new fridge. Then you need to actually have the skillset to remove the broken component and braze a new one in because everything uses brazed connections now to minimize leaks. Then you need to have the know how to properly recharge the system with refrigerant which when you’re working with a critical charge of maybe 2oz of refrigerant is an absoulte pain. All in all, maybe if you are already an HVAC tech and had the tools and materials on hand you might barely break even fixing your own fridge or freezer.
When it comes to consumer refrigeration they can’t be user repairable due to having to work with refrigerants and economies of scale mean they just generally aren’t worth a trained techs time to fix.
Old fridges never die. Modern fridges are more efficient but more break-y, can’t have both.
Old stuff that broke got thrown out and forgotten
Actually modern fridges are usually less efficient. But that’s because they use refrigerants that are literally thousands of times less harmful to the environment.
Old appliances frequently used R-12 which is an damn nice refrigerant except it depleted ozone and has a GWP (global warming potential) of 10,900. That means 1lb of R12 released into the air causes the same amount of global warming as releasing 10,900 lbs of CO2.
Newer appliances use refrigerants like R134a which still works pretty well, doesn’t deplete ozone, and only has a GWP of 1,430.
The newest appliances are more frequently using R-600a which is hard on compressors because it has a high head pressure and it doesn’t cool quite as well. But it also doesn’t deplete ozone and it has a GWP of just 3. The bigest downside of that one is that it’s very flamable (it’s isobutane) so the legal limit on how much residential appliances can us is very low.
Survivorship bias
I’ve read somewhere it is because compressor nozzle has to be made thinner/fragiler for the better efficiency. Other comments say it’s because old refrigerants were better but more “dangerous”. Maybe both.
Old appliances broke, but they were made to be easy to fix so our grandparents could just swap out the broken parts. I helped my dad replace the compressor on an older fridge as a kid and the heating elements on my grandma’s toaster. I remember my dad taking me to some locally owned mom and pop hardware store where we could buy replacement parts for old appliances off the shelf. My parents still have the toaster, but that store closed down and new stuff isn’t made to be fixable anymore (most likely due to planned obsolescence thanks to late-stage-capitalism).
On a tangent, when you think about it, throwing an entire toaster away because one heating coil burned out or throwing awag an entire fridge just because the compressor gave out is not rational. But if you tell people we should have the freedom to buy repairable appliances then they look at you like you are crazy. To me, it is the other way around. Sustainability isn’t political or a luxury, it is an inevitabe, unstoppable force of equilibrium.
When it comes to refrigeration in particular newer appliances tend to break more frequently because they are using more environmentally friendly refrigerants. Old CFCs cooled really well with minimal work from the compressor. Newer fridges and freezers are more frequently using isobutane (R600a) because it doesn’t deplete ozone and it’s GWP (global warming potential) is 3 where the GWP of even non ozone depleting HFCs can frequently be in the thousands. The problem is isobutane requires higher head pressures to work properly and doesn’t cool as well as older refrigerants so the compressors have to work much harder to get the same result.
Also when it comes to household fridges and freezers, they really aren’t worth it to fix anymore. You need an EPA 608 cert to even touch refrigerants (in the US anyways). Plus you need a two stage vacuum pump and a recovery machine (amongst other things) both of which can easily cost as much as a new fridge. Then you need to actually have the skillset to remove the broken component and braze a new one in because everything uses brazed connections now to minimize leaks. Then you need to have the know how to properly recharge the system with refrigerant which when you’re working with a critical charge of maybe 2oz of refrigerant is an absoulte pain. All in all, maybe if you are already an HVAC tech and had the tools and materials on hand you might barely break even fixing your own fridge or freezer.
When it comes to consumer refrigeration they can’t be user repairable due to having to work with refrigerants and economies of scale mean they just generally aren’t worth a trained techs time to fix.
! subscribe to fridge facts
but in all seriousness, very informative… thx
There’s a YouTuber (Technology Connections) who’s really into heat pumps, which is the tech responsible for refrigerators and air conditioners.